People who travel often in RVs and trailers know that it is necessary to make sure they have the right equipment to keep their vehicle level and stable. Walking from one end to the next can easily cause it to rock back and forth. Having travel trailer stabilizer jacks helps prevent this from happening. Not having these in place could potentially cause damage to the vehicle.
Keeping the vehicle stable is really important. Not only will things roll around, but as you walk through it will bounce. For two-wheel vehicles resting only on the tongue could cause it to tip backward or start shifting and rolling if they are not in place. The larger RVs usually are pretty stable because they are sitting on four wheels. They do also come with these types of jack stands to help keep it from rocking.
Three main types exist. The manual jacks have a hand crank that is used to raise and lower them. Hydraulic uses liquid pressure to do the same thing. These are often permanently attached to large RVs. The motorized are also popular because they setting into place with the push of a button. They should be placed at the four corners of the vehicle to provide the stability needed.
Park on level ground. If you can't find perfectly level ground, get as close as possible. You can you the front hitch on two-wheeled vehicles to provide the leveling. The RV has a system installed to do this for you.
Chocks and blocks need to be used to prevent the vehicle from rolling. The chocks should be put in place and hammered in with a rubber mallet. One in front and behind a wheel should do the job. This keeps it from shifting as it is being raised. The stands need to be placed on blocks of wood. This will prevent them from sinking into the dirt at the campsite. Sinking will cause it to become unstable again, so be sure to have sturdy, thick blocks to place the stands on because they will be holding a lot of weight.
Install or lower the jacks. If they are removable, pull them out of storage and set one on each block of wood. Raise them, or lower them if they are attached to the RV until the vehicle is held in place. They should be nice and tight and pushing up pretty hard in order to keep things from moving around when you're inside the vehicle.
When you are ready to go, just reverse the process. Take down the stands and put the blocks away. Be sure the emergency brake is on before doing so to make sure it doesn't roll when you pull the chocks out. A slight movement isn't too big of a deal. Before removing the shocks, hook the hitch up to the tow vehicle.
Safe camping includes using chocks, blocks and jack stands. They will keep the vehicle from moving and provide a stable environment for moving around. Since they are not built on a foundation like a house, this provides that foundation. They should be placed at all four corners in order to have the best effect.
Keeping the vehicle stable is really important. Not only will things roll around, but as you walk through it will bounce. For two-wheel vehicles resting only on the tongue could cause it to tip backward or start shifting and rolling if they are not in place. The larger RVs usually are pretty stable because they are sitting on four wheels. They do also come with these types of jack stands to help keep it from rocking.
Three main types exist. The manual jacks have a hand crank that is used to raise and lower them. Hydraulic uses liquid pressure to do the same thing. These are often permanently attached to large RVs. The motorized are also popular because they setting into place with the push of a button. They should be placed at the four corners of the vehicle to provide the stability needed.
Park on level ground. If you can't find perfectly level ground, get as close as possible. You can you the front hitch on two-wheeled vehicles to provide the leveling. The RV has a system installed to do this for you.
Chocks and blocks need to be used to prevent the vehicle from rolling. The chocks should be put in place and hammered in with a rubber mallet. One in front and behind a wheel should do the job. This keeps it from shifting as it is being raised. The stands need to be placed on blocks of wood. This will prevent them from sinking into the dirt at the campsite. Sinking will cause it to become unstable again, so be sure to have sturdy, thick blocks to place the stands on because they will be holding a lot of weight.
Install or lower the jacks. If they are removable, pull them out of storage and set one on each block of wood. Raise them, or lower them if they are attached to the RV until the vehicle is held in place. They should be nice and tight and pushing up pretty hard in order to keep things from moving around when you're inside the vehicle.
When you are ready to go, just reverse the process. Take down the stands and put the blocks away. Be sure the emergency brake is on before doing so to make sure it doesn't roll when you pull the chocks out. A slight movement isn't too big of a deal. Before removing the shocks, hook the hitch up to the tow vehicle.
Safe camping includes using chocks, blocks and jack stands. They will keep the vehicle from moving and provide a stable environment for moving around. Since they are not built on a foundation like a house, this provides that foundation. They should be placed at all four corners in order to have the best effect.
About the Author:
You can get a summary of the things to keep in mind when buying travel trailer stabilizer jacks at http://www.trailerlegs.com/about right now.
0 komentar:
Post a Comment