In electrical systems, high temperatures normally indicate an impending trouble. This can result from unnecessarily high resistance, short circuits, poor connections, ground fault or any other failing components common with electrical equipment. The problem must be pinpointed and rectified early enough as complete failures are normally expensive and at times can results to catastrophes. Instead of struggling to find the incipient failures through visual and other manual inspection methods which are costly, time consuming and may not pinpoint the problem, engineers are now turning to electrical infrared inspection that has proved to be the most effective alternative.
Through this method of inspection, it is much easier to locate the underlying problem reducing downtime and equipment damage. It also come with additional benefits such as prevention of catastrophic failures well in advance, help establish repair priorities, improves preventive and maintenance efficiency and provides for testing under load hence avoiding costly shutdowns.
The target is to pinpoint any damages or potential threats resulting from improper installations, points of weaknesses, contamination, corrosion or worn out devices. The other problems can result from ground faults and improper assembly leading to increased resistance which is the recipe for overheating which on its own is a danger to the rest of the system and the surrounding objects. If left unchecked power outages are the least of problems that can result.
The other benefit of this survey is that there is no need to shut down the system. It is a non-contact a nondestructive form of testing (NDT) that allows for work continuation without interrupting system production. The equipment get inspected under normal loads and the normal operating condition by scanning devices to reveal the existing and emerging problems before it is too late.
Using the state of the art equipment deployed for scanning, thousands of components get inspected in a matter of hours with very accurate results. With very high rate of efficiency and effectiveness, most of engineers are now using this form of inspection. It cut down on staff needed for the job and increases profitability by a big margin. In fact, it has one to four returns on investment and as such, companies that hope to survive into the future have to adopt this technology.
This form of inspection is endorsed and recommended by several associations and regulatory bodies such as the InterNational Electrical Testing Association and National Fire Protection Association among several others. It has 1 to 4 returns on investment for both the labor and material used. It is this cost benefit analysis that make is a viable business for many companies that now offer this service.
This form of testing and survey therefore saves engineers millions of dollars improving profitability and significantly decrease the expenses in the areas of operations, testing and maintenance in general. With this convenience and financial benefits, this is a technology you cannot afford to miss in this century if you think of remaining in business.
It is important to trust the surveying services to a company that has expert engineers, the necessary machinery for the job and well proven track record in order to enjoy the full benefits of this new technology.
Through this method of inspection, it is much easier to locate the underlying problem reducing downtime and equipment damage. It also come with additional benefits such as prevention of catastrophic failures well in advance, help establish repair priorities, improves preventive and maintenance efficiency and provides for testing under load hence avoiding costly shutdowns.
The target is to pinpoint any damages or potential threats resulting from improper installations, points of weaknesses, contamination, corrosion or worn out devices. The other problems can result from ground faults and improper assembly leading to increased resistance which is the recipe for overheating which on its own is a danger to the rest of the system and the surrounding objects. If left unchecked power outages are the least of problems that can result.
The other benefit of this survey is that there is no need to shut down the system. It is a non-contact a nondestructive form of testing (NDT) that allows for work continuation without interrupting system production. The equipment get inspected under normal loads and the normal operating condition by scanning devices to reveal the existing and emerging problems before it is too late.
Using the state of the art equipment deployed for scanning, thousands of components get inspected in a matter of hours with very accurate results. With very high rate of efficiency and effectiveness, most of engineers are now using this form of inspection. It cut down on staff needed for the job and increases profitability by a big margin. In fact, it has one to four returns on investment and as such, companies that hope to survive into the future have to adopt this technology.
This form of inspection is endorsed and recommended by several associations and regulatory bodies such as the InterNational Electrical Testing Association and National Fire Protection Association among several others. It has 1 to 4 returns on investment for both the labor and material used. It is this cost benefit analysis that make is a viable business for many companies that now offer this service.
This form of testing and survey therefore saves engineers millions of dollars improving profitability and significantly decrease the expenses in the areas of operations, testing and maintenance in general. With this convenience and financial benefits, this is a technology you cannot afford to miss in this century if you think of remaining in business.
It is important to trust the surveying services to a company that has expert engineers, the necessary machinery for the job and well proven track record in order to enjoy the full benefits of this new technology.
About the Author:
You can visit www.infraredscanningservice.com for more helpful information about Using Electrical Infrared Inspection Is A Sure Way To Save Time And Money.
0 komentar:
Post a Comment